This article will be as long as it is comprehensive. Today, I will share a guide on connecting Satellite decoders to the Internet. This tip will work for standalone FTA decoders and decoders manufactured by Pay-TV companies. When I say pay-tv decoders, I mean such decoders by companies like beIN, Multichoice, canal, sky, direct tv, etc.
Similarly, FTA/IKS standalone satellite receivers refer to such decoders as Qsat/cobox/nusky, tigerstar decoders, t-link, hellobox, icone decoders, starsat, Dreambox, enigma, Openbox, cisco and so on. This article is well-researched and the delivery will lay to rest any confusion or worries about why your decoder is not detecting your internet connection. Apart from this, I will give you a comprehensive guide on how to Connect Satellite decoders to the Internet.
Must read:
-
- How to Manually load IPTV .M3U/.M3U8 Playlist Streams on Various Devices Such as; Android, iOS, Smart TV and others
- Manual Internet Profile Settings for Phones, Usb Modems & Wi-Fi Routers
Why do you need to connect your Satellite Receiver to the Internet?
Nowadays, most things are digital. People now lean more towards streaming tv programs online than watching them via satellite tv subscription using a dish. Aside from this, you need an internet connection to perform some basic operations on your receiver that could enhance your viewing experience. Initially, many pay-tv operators disabled internet access on their decoders. Today, they have enabled such because they need it to power their streaming services. Multichoice, for example, has DStv catchup, box office, and showmax. Showmax requires a stable internet connection to operate.
Conversely, dongles and FTA decoders have had internet protocols integrated for a long time. For example, strong decoders have had the internet in 4910 for over ten years. T-link, Dreambox, and open box have enabled internet on their products long before strong decoders. Now, this brings us to why we need internet on satellite decoders.
- This is the most important reason for security patches and timely software upgrades. The update can be rolled to devices in real-time if connected to the internet. However, this can be done without the Internet too.
- An internet connection is a must for those looking for decoders that serve as alternatives to Pay-TV(this can be illegal). Especially if you are watching IPTV or iks(cccam channels)
- Also, even with powervu and biss keys auto-roll decoder, you will still need an internet connection to calculate and set new keys.
Basic Internet Protocols/Modems Available for Satellite Decoders And Receivers
We have five internet gateways for any satellite decoders or STBs. One is already becoming obsolete. I will now highlight the list of all the internet protocols you can find in any decoder, including their popularity.
- LAN/Ethernet Connection via an RJ45 Cable. This is the first and the most stable connection any decoder can have. Most decoders come only with this type of connection.
- Wi-Fi/wireless connection to a Wi-Fi hotspot. You can establish this connection by buying a wifi adapter for regular satellite decoders. As for android tv boxes, you can connect to a Wi-Fi network without a wifi adaptor using a hybrid decoder or an android tv box.
- 3G/4G/5G Connections: You can establish this connection by connecting a USB internet dongle to your decoder.
- Edge/Gprs/Gsm/2G Connection. This kind of connection is the slowest, lagging phasing out. To use a 2g on a decoder, connect it via a 2g modem or insert the sim card directly.
- VPN connection: this is not an internet connection on its own. However, you can use a VPN on some android tv boxes to anonymize your activities.
How to Connect Satellite Decoders to the Internet: Works For All Satellite Receivers
This section will teach you how to connect your satellite decoders or Android TVs to the internet. We will be using the four most popular internet protocols as our guide.
How to Connect Satellite Decoders to the Internet via Wireless Connection
The image below is of a decoder connected to the internet via Wi-Fi. Next, I will show you how to connect any decoder via a wireless network to the internet.
Requirements
- Your satellite receiver must support a Wi-Fi connection before you can connect it to the internet via Wi-Fi.
- Secondly, you must have a compatible Wi-Fi adapter ready for your decoder. Note: some decoders support wifi connection directly without the help of a USB Wi-Fi adapter/dongle.
- Finally, get a Wi-Fi hotspot. This could be from your phone’s mobile hotspot or a Wi-Fi/Mi-Fi router.
Step 1
Plug a compatible Wi-FI adapter into the USB port of your decoder.
Step 2
Activate the WiFi hotspot of the device you want to share the internet from
Step 3
Power your television and satellite receiver if the equipment is turned off. Next, press the “Menu” button on your remote, go to Settings/Setup, and select network/config/network settings. Next, choose WiFi network/wireless from the list of internet protocols available on your decoder. See the image below.
Step 4
Next, select Wifi>> enter your WiFi hotspot’s password where applicable and select “Connect Now.”
Step 5
Once the connection is successful, you should receive a pop-up message or a sign on your decoder indicating that. You now have an internet connection on your decoder via WiFi, and you can access all the internet-dependent apps and features on your decoder. Next, we are going to look at connection via LAN.
How to Connect Satellite Decoders to the Internet via LAN Connection
As I said earlier, the most commonly used default internet protocol for decoders is a local area network(LAN). I will teach you how to connect your decoder to the internet via LAN. Meanwhile, you must have properly configured your router(that supports LAN). The image below shows a decoder successfully connected to a LAN network via an RF45 cable.
Requirements
- Your satellite receiver must support and come with a LAN port before you can connect it to the internet via LAN.
- Secondly, you need a router or network switcher with at least one high-speed LAN port. The router could be either 3G or 4G. I will recommend a 4G router, though.
- Finally, and not least importantly, you need to get a LAN cable. This cable is pretty cheap; you can buy it from any computer accessory shop. An example of a LAN cable is in the picture below:
Step 1
Plug the Ethernet/RJ45 cable into one of your router’s “Out” ports.
Step 2
Attach the other end of the cable to the “Ethernet” port on the backside of your satellite decoder.
Step 3
Now, Power on your router, television, and satellite receiver.
Step 4
Press the “Menu” button on your satellite receiver’s remote control, then choose “Setup/settings”. Option and select “Network Setup/network>> network settings and change the connection/link protocol to LAN mode.
If your router opens the DHCP function, your decoder will acquire the IP address automatically, and you will receive a notification confirming this on your screen. See the image below for clarification.
Step 5
Choose “OK” or “Done” once the receiver detects the Internet connection.
Note: make sure your modem has successfully established a network connection with the router before connecting it to your decoder.
How to Connect Satellite Decoders to the Internet via 3G/4G USB Modem/Dongle
Requirements
- First, ensure your satellite receiver supports a 3G/4G/5G USB internet modem. Then you need to get a compatible one. This post will help you get a compatible USB modem for your decoder or Android TV box.
- Once you have your USB modem, make sure your decoder supports it. Don’t buy a 3G/4G modem for a decoder that only supports LAN internet. Next, please set up your modem from within its dashboard on your PC.
Steps to Connect your 3G/4G/5G Dongle to your Decoder.
- First, buy and load the sim within your 3G/4G modem with an appropriate internet data plan.
- Next, connect your 3g/4g modem to any of the USB ports of your decoder.
- Now press “Menu” on your decoder’s remote control and navigate to settings> select network>>network settings. Now choose 3G/4G network as your internet protocol. Immediately after you do this, your decoder will notify you that a USB device has been found.
- In most cases, your decoder may not get an internet connection automatically. When this happens, you must manually enter your internet service provider’s APN parameters.
- Now press a specific button on your decoder’s remote to connect your 3G modem. This button varies with the decoder. it could be yellow, green, red, or blue. The good news is that you will receive a clue as to which button to press on your tv screen. Once the connection is successful, you will receive a success message. Otherwise, you will receive a “No Dongle device found,” as shown below.
Note: If you receive an error even after entering the correct Internet profile settings into your decoder, it simply means you are using an incompatible 3g modem or the sim inside your modem is not Internet-enabled. If the option is available, select auto-connect to instruct your satellite receiver to automatically connect your 3G/4G modem the next time you power it on.
How to Connect a Hybrid Satellite Decoder or an Android Box to the Internet
A hybrid decoder combines the functionalities of an android tv box and a satellite receiver. We have many top-of-the-line hybrid receivers, but they are pretty on the high side regarding cost. Some good examples readily come to mind are Tigerstar T3000 android tv plus satellite tv receiver, Starsat extreme decoders, and icone iron plus decoders.
Connecting a hybrid decoder or an Android IPTV box to the internet is easier than connecting a regular standalone satellite receiver.
The reason is that Android boxes and hybrid decoders share a familiar network interface. Maybe it is because they all run on the Android operating system.
Steps to Connect an Android IPTV Set Top Box or a Hybrid Decoder to the Internet
- Configure the internet modem you wish to use. If you are using a router, preconfigure it on your pc. Alternatively, if you are using a 3g/4g modem, do likewise.
- Next, connect your internet modem or router to your box and power it on. Don’t forget to connect both ends if you are using LAN.
- Once your decoder/STB is on, press the menu on your remote and scroll to the network.
- Here, you will see the list of internet protocols your device supports. Select the one you wish to use and press the corresponding button to connect.
- Enter your WiFi password if you select WiFi, or enter your APN if you choose 3G.
- Once the connection is successful, you can use the internet on your box. See the image below for a successful connection to a wifi hotspot on tigerstar hybrid android tv box.
Tips on How to Configure a WiFi/LAN Router on Your PC or Mac Before Connecting it to Your Decoder
For the full guide, you can read my post here. In most cases, you will need to configure both the 3g/4G modem that you want to use before first use the first time. Now we have several routers, but if I am to recommend, I will recommend standalone routers like Huawei, ZTE, TP-Link azsky G3, hame, and Vodafone wifi routers.
Whichever router you choose, make sure you set it to use just a network at a time instead of it auto-switching.
Also, every router comes with a URL in the form of an IP address which you can open on your pc browser. For example, the link to azsky g3 dashboard is http://192.168.0.1/main.asp(you must connect your azsky g3 router to the computer via a LAN cable before you visit that link in your browser). This IP address is always written on the body of your router. The link to the dashboard of the tp-link router is http://192.168.1.1, and that of the Huawei router is http://192.168.8.1/html/home.html.
Once you open the URL on your browser, it will automatically open the dashboard of the router, where you can customize a lot of settings.
Things you can modify here include: assigning a name to your wifi hotspot, assigning a password to your hotspot, and changing your network mode to either Auto, 4g, 3g only, or 2g only.
The password and user name is most of the time “admin” unless otherwise stated. Please only change those things mentioned above, no more, no less. Once you are done changing, remember to save your changes.
It is worthy of note that any good router can be used for two purposes 1. to serve as a “lan connection(also known as a wired connection) and 2. to serve as a source of wireless connection, also known as wifi hotspot or wifi router. The interface of the azsky G3 wifi router below will give you a clearer picture.
What to change while setting up a Wi-Fi router for use with a Satellite Receiver
- First, connect your router to your PC, mobile browser, or Mac via LAN cable or Wi-FI.
- Next, you must visit the unique URL/IP for your router in your web browser.
- You will see a login page; enter your username and password accordingly. in most cases, the password is “admin.” see below
The picture above depicts a login page that is common to most routers when you are about to access their dashboard on your computer.
- Most routers come with easy to understand interface. You can easily change your router’s name(SSID) from this dashboard. Wifi hotspot password and even your APN
- The above is how you change your wifi password mine is “88888888” Whichever password you choose, it must not be lesser than 8 characters. Make sure you choose a secure and easy-to-remember password.
- Once you are done, save, exit, and reboot your wifi router to effect the changes.
Pls sir, I bought icon decoder, but after connecting to internet successful, when I try to open YouTube, it will write wait after some minute, it will display not found, the same applicable with IPTV, sir please, what will I do to start the applications there.
@iyke: for youtube, maybe google has revoked the access on your specific decoder. For iptv, are you trying to use a free iptv stream ? what type of decoder are you using by the way?
Hello . Can I get internet from my home receiver?
@hemt: Browsing The Internet With a Satellite Decoder: Is it Possible? Here is Everything you need to Know
Hello. I’m one of your admirers long before now. I cherish and thank you for all the tutoring on how to connect internet with decoder. I want to share an experience.
I bought a Free to air decoder,D Tech 9900, recently and at point of purchase till some weeks later, i was connecting with internet through USB and 3G and viewing channels before it stopped. Each time the internet was connected with the decoder, and I try scanning through “IPTV”(which is how I have been using it since purchase of decoder),the scanning will stop popping up ‘’Active Code Expired” message. Like I told you earlier,I have the internet access already with the decoder, but this message ends it. Though,I was able to access YouTube on the decoder, but I have been unable to view channels.
Can you help with how to get the active code so I can be able to view channels as before.
@Adefioye: the account that came with the decoder is for a limited number of months(min of 3 months and max of 24months). You need to buy a compatible code if you want to continue watching IPTV content on that decoder. https://www.lemmymorgan.com/lemmy-morgan-2022-update/
hi just wanted to know if the new Multichoice HD standard single view decoders can be connect to internet? eg Models HD 5u / 5s/6s and the latest release is the 8s cause their all have LAN connection port and that has always got me interested and I had lot of un answered questions in my research , so hopefully, I will be answered?
@sibusiso: this post is all you need to read. thanks Browsing The Internet With a Satellite Decoder: Is it Possible? Here is Everything you need to Know
Pls what’s your location and I will like to find out if you do offer practical training
@sulaiman: it depends on the type of practical lessons you want
Please am using strong4922A and I need good account for it how can I get it and how do I used it
@Yussif: How to Troubleshoot Problems with A Cccam/Mgcamd Account Easily
I have an Alphabox decoder and HSDPA modern can they work together?
@Jsja: READ this Compatible USB thread
hello, i have a decoduer single sat, and i have them connect mtn benin login key and configure, the conexion has been successfully connected but refuses to connect to the server, helped me connected to the server to be able to decrypt them pay channels
@moses: get a working cccam. or test iptv channels on it
Mr. Lemmy, thanks for the good work you do on satellite receivers. can you talk about these satellite receivers that are in-built in these TVs like hisense, Lg, beko, i-tec etc. a friend of mine bought a 32 inch TV which has an in-built decoder but didn’t no how to go about using it.
@Mike: track the channels with a standalone decoder like strong or a satfinder, then connect it to your TV.
Please what about Dstv decoder and startimes decoder and its built in decoder tv. Is it possible for them.
@bawake: yes. You can connect dstv to the internet with a Lan cable
Please process
@Bawake: every paytv decoder has an on-screen prompt that explains how to connect to the internet.
hi Lemmy
please i need information connecting my HD RECEIVER DELSAT PREMIUM II WITH INTER NET HOW IT IS POSSIBLE IT DONOT HAVE INTERNET CABLE SUPPORT ONLY HAVE USB connectivity option
@Essons: if it has only wifi option then you must use a compatible wifi adapter. Learn more here https://www.lemmymorgan.com/compatible-decoders-wifi-adapters/
Pls my q26g displays Connect to Server after displaying Network Connection Success…. Hence cant enjoy dstv channels. It has been so for about 2 weeks ago… Pls help me out.
Thanks for the good job.please sir I still don’t understand how to renew my qsat26
pls am using qsat q26g i want the activation code.
lemmy i have tried using a modem, and almost all the network sim cards to reveal my avatar account after update but it keeps telling me cannot connect to server (q13 decoder)
@stven, it then means your decoder has a hardware problem.
Lemmy thanks a lot. I have succeeded in upgrading my qsat q13g decoder but I cant configure it to connect to the server. There is no Nigeria in location option. what will I do?
@Israel, well it depends on your internet protocol. Please search for how to connect qsat to internet on http://www.lemmymorgan.com
hi LM, happi nu year broda, how do i get all the radio stations to on qsat 23g especially dmx………………please advise
hi, i tried connecting my qsat 11g through my airtel huawei modem and ts not connection after upgrading it to the latest version 6.10 software you uploaded. though my modem is unlocked i.e the 173u-2 86 series modem from aitel, i could not unlock it, can you help me.
hmmmmm!
i have got issues. my q13g just not working though i have signal around 94 and quality round 94. i didn’t know all about cccam or new… and i was just switching sim cards since that was what i was told by the dealer. how can i know if i am banned and upon checking, i realise mine is a cccam code which starts with 47******** . how can i get it to work again?
@apphia, sorry yours is an avatarcam code. Cccam doesn’t come preloaded on qsat decoders. You have to buy a cccam account separately if you want to use it in any compatible decoder. http://www.lemmymorgan.com/dynamics-of-cccam-accounts-card-sharing-know-everything-about-cccam/
good day Mr Lemmy, you are doing a wonderful job, well done. I have been following your post for a while now and your posts are quit easy to understand. but the only aspect i am having confusion is the wifi connectivity, i read your post on that subject what i do not understand is the antenal at the back of Q11G, i thought that is the wifi that came with it,my question is, does it mean that it is not working that we have to buy usb wifi adapter? after the upgrade i tried using my phone hotspot to connect but did not connect? what is your take on this matter? thanks.
@saint GPRS antenna is different from wifi usb adapter. To use a hotspot on your. Decoder, you must buy a wifi adapter separately. Thanks
hi lemmy, i have noticed my cccam account disconnect and connect regularly at the background though it does’nt always freeze the channel but sometimes it does, so pls what could be the reason for this and how to amend it. I’m actually using huawei usb modem with my speed hd. Actually i was thinking of using another server no to enter the same account detail in the same decoder, probably with the possibility that if one server no is disconnected the other would be connected within the same decoder. So i really want to know if it is adviceable to do it?
@hasmo, please change your sim card. That’s the only reasonable thing to do
Dear Lemmy, From last week when I open my 13g QSAT IT REMINDS me date for my server to expire. I went to my xcam and avatar and say that de expiring date there was 04/11/2014. A friend advice me to run the old update and later run the new update and it will come. I did and it was coming till yesterday evening it stop openning. when i go to avatar it tells me avatar registration fail. what should i do, pls help me
@Lemmy…I will appreciate if you can link me up with a tutorial on how to re install my qsat g23g after my silly cousin clicked on factory reset …I will appreciate if you can help with tutorial on that
@samuel: HEREEE
I was using Strong Decoder called SRT4922 with AZSKY G1+ Dongle. Now that the whole thing is no longer working for quite some time , what other useful thing can i use the decoder and Dongle for? Thanks
@Ajet, azsky is now back.. renew your account continue enjoying it
mr. lemmy i need your help urgently, any time i connect my 3g modem to my q-sat even the message ……….. has found a storage devise doesnt show up, Oga please what is the problem? and what should i do to solve such problem…..
@eugene, it simply means your qsat decoder doesn’t recognise your modem
h/w version: dk-v1.0
s/w version: rel v6.05.12
load version: 05/31/2013 12:37:38
build date: 03/13/2014 16:02:56
mac address 00-11-05-68-c9-ad
sn.: 00110568c9ad
please this is thge information on my qsat q11g. it has been scrambled for about 2 weeks now even tho the account still has about 40 days left, is there a solution for it? thanks
@peter, all qsat in Africa are having problems. You can read my latest update here for the way forward : http://www.lemmymorgan.com/important-updates-on-qsat-cccam-t-link-azsky-others/
Uncle Lemmy still it not showing with LAN it just say Connected to network success what is way out
Lemmy pls I tried to connect my qsat with tp-link router through LAN using 3g modem with etisalat the decoder refuse to connect to internet, I try all thru but not succeed but the router work well on my laptop pls help me.
@adesan, your router must connect before connecting the lan cable to your decoder sir
Pls help me attatch the qsat software version 6.52 or 6.06.8 on ma mail. Tanks and God bless u 4 ur gerouse wrk. Wale
@lemmy is the tv1.dns2.us account working, the server is saying online but my dstv channels are still scrambled. What satelite/tranponder should i use, currently am using eutelsat 36a.
@kelu pls contact your dealer. Only he can solve that for you. However tv1 is online as I type
Hi Lemmy,
I tried connecting my Q23G decoder using a lan internet cable connected to my SWIFT 4G modem… But it didnt work although it showed network connection success… Any ideas?
@chendi, pls use a 3g modem or your sim card directly. It will work perfectly
Guru, please give me directions on how to access youporn,redtue ,youtube, yahoo weather and iptv etcin my Q SAT 23G.
@joseph pls read the followings http://lemmymorgan.com/solutions-to-errors-during-after-upgrading-qsat-to-v5-other-tweaks/
I found one on this page with Egypt on the screen, I tried it but didn’t connect. I tried to configure etisalat but I can’t save the DNS after changing to 8888. Pls help
@ola, you don’t need to manually modify anything on qsat for you to successfully established any internet connection on qsat. You are mixing things up for yourself
Hi Mr. Lemmy.
I’ve tried using a 3g dongle on my qsat q23g with code 45**** but all the dst* channels scrambled. I’ve tried both GPRS & 3g. In xcam setup > sharing, does the status have to show connected after pressing blue button to reconnect successfully?
Could it be a problem with account though it doesn’t expire till next year.
Thankyou
@Chomba, you don’t need to visit the sharing menu on your qsat whatsoever if you are not using a cccam account. please read the following articles on how to properly setup your internet on qsat or and setting up your qsat inbuilt(avatarcam account) A-Z Tutorials On How To Connect Your Decoder / Dongle To Internet [ Solve internt connectivity issues on Decoders] and SOLUTIONS TO ERRORS DURING & AFTER UPGRADING QSAT TO V5[+ OTHER TWEAKS]
Good evening Sir Lemmy Morgan,
I tried using LAN from my Spectranet 4G Lte for my Q23G but it did not work.
What can I do Sir?
Your advise will be appreciated.
@gozie, then use a 3g modem sir
LM…..God bless you for ur gud wrks… I wanna ask does hauwi E1550 wrks on cccam on 4922A??
LM, I have tp link dual router with 2 usb port, and I have been trying to connect my USB modem to supply Internet without success. What do I do to achieve this step. Again the step is from my USB MODEM> ROUTER > COMPUTER LAN cable.
@Marsh, maybe your router doesn’t support 3g modem or you are using an incompatible modem with it
Good evening mr LIMMY. I succeeded to connect my qsat 13 to the internet by using etwork cable but the brobleme that i have is the qsat gos off any time that i swich from IPV channels to the numal DSTV channels, and i also wan to ask if this LAN INTERNET can open DSTV channels because i succeeded but with the IPV channels. THANKS
@nchinda, yes lan opens dst* channels perfectly
hi lemmy recently my q11g refuses to connect to the internet does not show connection success so i cannot watch anything, i checked all the settings which are correct i tried using modem thru3g it connects and show could it be a problem with the sim slot cos it seem not to sense sims i tried different networks but it failed
@Kabirus, please there is no ambiguity about this, your decoder will dictate the internet protocol to be used in a given location. If you move to another location, it maybe possible for you to use a sim card.But as it stands, in your current location, you can only use a 3g modem
hi lemmy , pls i cannot watch iptv and youtube on my Q11G with my modem using 3g, it always shows data error after loading for sometime but i can watch dstv with out any interruption what could possibly be the problem
@kabiru atop using etisalat if you want to use iptv
pls mr lemmy morgan, how can i pay for data bundle on my modem to use for my qsat
@sayo normal data plan subscription. please call the customer care for appropriate fees or search http://www.lemmymorgan.com for list of internet access codes for mtn, glo, etisalat and airtel
you’ve been most very helpful, Lem.
thank you so very much.
okay…
and this ypir databundles are what exactly??
I’m a complete ‘idiot’; please help me understand.
… can they solve my ‘probkem’ with connectivity?
@Tizwiz that is you will subscribe to the internet bundle of either MTN Nigeria, etisalat, glo or airtel. Then you will follow the link here on how to use your data bundle to watch satellite tv on qsat or similar decoder. However if you talking about using a decoder to browse the internet free of charge, then it is not possible currently
Hi Lemmy,
I am an avid fan and reader if your blog; more grease to your elbows.
I have some ‘issues’ and I wonder if you can help me out.
foremost, it is with internet connectivity as regards great band with and service reception. I am often frustrated with the speed and quality of the data services of airtel and MTN. Glo is good but usually unstable. Etisalat is great but expensive. I’ve tried using VPN apps like yourfreedom and droidvpn but they do no help since they too rely on the network providers.
I am curious about this ‘satellite TV to internet’ stuff. could you help me, please?
I use the web for downloads, heavy downloads and streaming; I have a blogging passion to attend to and I sometimes chat online.
at my disposal is a laptop, an Android phone, a space digital satellite antenna (with Strong decoder), a cracked glo modem, and my brains.
what do you think is in this satellite Internet stuff?
@tizwiz no free satellite internet stuffs currently. What we have now is using ypir data bundles to give your decoder internet access
Mr Limmy good day Sir. Please i need your help Sir. I have been trying to connect my Qsat to the LAN internet connection that i have but there is some problems that am facing. I have connected my Qsat and my compute with a network cable and i do not know if it can work with this network cable because i do not have a router. and if it can work then Sir help me with how i can shear the connection from my computer to the Qsat. Thanks Sir am waiting to her from you.
@nchinda, you can share it through wifi but you will buy a wifi adapter for your qsat. Alternatively you need to share it from a router. Direct pc to qsat lan connection doesn’t work
Lemmy, I need help in unlocking my Glo Bolt modem. Have been sieving thro ur site but could not locate any. Kindly assist.
Thanks
@Dahny glo modem cannot be unlocked for now
pls any update on.azsky?
I know Lemmy, its future purpose. I plan using d Azsky wif qsat once Azsky comes up and my cccam account expires and that’s still next year! i just want to buy the cable now.
@mr brave well the cable comes with every azsky Dongle
Hello Lemmy, please what is the name of the cord used in connecting an azsky dongle [rs232] to a Qsat decoder? I want to order it online but I don’t know the name! Thanks bro.
@mr brave why will you connect azsky to qsat when qsat is working and azsky is not working?
Pls help me unlock this Airtel ZTE modem
model no:- MF190U
IMEI no:- 863164010806594.
Thanks I will be waiting for the unlock code , God bless you all
@abdul, I doubt if airtel modems can be unlocked. Pls try dc-unlocker but I doubt it anyway
Hi Lemmy,
you listed “Strong” as one of the decoders to be covered in this post but alas there is no subtitle to that effect.
I am interested in this post for an SRT-4930L. Thanks.
pls Lemmy what is update on azasky? guys any latest change to the fast red blinking.
@idris, we remain calm
Boss TV1 account with port 13000 or the new server
@san tv1.dns2.us is working currently
Pls Oga, is it possible to use part of ur sd card in ur phone as ur phones’ ram?
boss is TV1 account on the server back?
@sean which one of them? Sat1.dyndns.ws or tv1.dns2.us
LM, I read about this software{connectify}and I find it very interesting but what bothers me is that I will need an wireless adapter attached to my pc before it can work effectively.pls if am wrong correct me.
@marsh once your pc has wifi capabilities, you don’t need any wifi adapter for your pc
What cable can I use to connect qsat 13g to laptop
Thanx Lemmy for the clarification.
Hello I just want to ask is the Biss key 4 Tv3 working right now sir?
Pls Oga, is Azsky working now ?
bros i gret tnks 4 ur tutoria my qestion is that i can’t watch utube on my qsat dec.i inserted etist line directly on my decoder{other channels ok}pls help
@juo YouTube is an iptv you can’t watch it with 2g network. Use a 3g modem
pls sir, is g3 router available now? I need it asap. thanks
I greet you sir. Please I want a clarification on how Speed HD S1 works pertaining to software upgrades. What happens to the system when there is a software upgrade for avatar cam? Won’t it affect the operations of the Speed cam account? Does that mean that one needs to upgrade the two accounts after an upgrade of the avatar account? Please help me out. It seems a bit confusing. Won’t the the two accounts be conflicting each other during or after upgrade? Thank you. Have blessed day
@eric it’s so obvious you don’t own a speed hd s1 decoder. If you own one, you will know that the interface / protocol for speedcam is different from that of avatarcam. And secondly you will realise that a qsat software cannot be used on speed hd s1. So where is the confusion?
LM.thanks for your assistance am now convince your really a genius in the making. Thanks once again for the wireless and wireup issue I have.
Mine too, it’s a general problem. Code 40xxxxxxx is offline
@lemmy is qsat code 41 working
@john no its not
hi, bwana lemmy?my qsat with code 40***** has stoped. is this a general problem or other codes are working?
@chibesa all other codes are working sir
my oga,qsat code 40 *******working mine is down since yesterday evening thank u
@lemmy good day sir is qsat code 40 *******working mine is down since yesterday evening thank u
Hi lemmy can i use a airtel morden to watch dstv can i fix it at the usb port will it work
@rafel not just the modem, modem with a cccam account + a compatible decoder
Hello sir,my decorder does not respond to Dongle ,what should I do to solve this problem?
LM, I tried wifi connection through my q5 hotspot but it did not work. I know that wireless hotspot connect through one of this channels,Bluetooth or Tethering . And qsat doesn’t have Bluetooth to connect. Don’t you think that’s the problem?
@marsh you need to buy and attach a wifi adapter to your decoder before it can detect a wifi hotspot connection. Pls read in between the lines
Please ogah Lemmy,my q 23g keeps freezing all the time,meanwhile I am using mtn latest modem,secondary my q23 does not support IPTV,when ever I try to watch IPTV it doesn’t work.so please does it mean my doesnt suport iptv?it always says failure, please kindly teach me what to do.thank u very much sir.
@sammy maybe mtn is not the strongest in your area. Try another sim card. As for iptv, can you watch YouTube??
Tnx Lemmy for your concern but my laptop has only 15 pin serial port, it doesn’t have 9 pin port.
@kwadwo use a desktop computer, not a laptop. Thanks
Hi lemmy i have a airtel morden with az sky G1 can it work when i connect it at the usa port am using strong decoder
@raferl azsky dongles doesn’t use 3g modems, they use direct sim card. Only azsky g6 uses 3g modem because it’s has the capability to use a cccam account as well as iptv
sir please am planning to buy qsat I have being following ur update sir I av a Glo modem though I crack it so dat it will be compatible with all other sim sir please can it work on qsat wen I bought it since you said 3g is more better for first time activation. thanks
@papagift yes it will work as long as the modem is compatible and the sim inside the modem is internet enabled
Thanks for this wonderful update.
In my own case, while using airtel 3g with my qsat i had to manually confiqure by adding the following:
country = Nigeria
operator = Airtel
apn = internet.ng.airtel.com
and all other things were added like dial number and the rest.
The same was done for all other operators in Nigeria.
Pls as a matter of urgency, am NOW ready to get the following items from you: azsky G3 router, LAN cable and wifi adapter. Kindly send the cost and mode of delivery to my email; [email protected]
@pa_effiong, it doesn’t work that way, you can’t contact me through my email for business discussion
What cable can I use to connect AZSKY g1 super to laptop and where will I get some?
@kwado, use the rs232 cable that came with your azsky Dongle to your desktop computer. You will plug this cable directly into the 9pin serial port of your computer
Oga Lemmy thank you for dis wondaful tutorial, pls am not familiar with dat router i only know modem. Pls where can i buy the router if i want to.
@ famous, where they sell satellite accessories
pls mr lemmy , can I also use other cccam account to watch DST* channels with Azsky super g1?
@ismail cccam only works on supported decoders, not on dongles like g1+, g1 super or a+. G6 is a full hd decoder with Dongle capabilities and that is y a cccam works on it
Thanks very at first I was finding it difficult to connect my 3g modem but now with the help of yur tweak I been able to connect my 3g modem to my qsat 23g and is working fine and am now relive that I can use a cccam account in my 2g area. Thanks once again bro.
@ charisma, pls don’t use 2g with a cccam account.
I am having issues on connecting to the internet. pls help out
@Israel, search the site “www.lemmymorgan.com” for how to connect qsat to internet