Summary of Contents for AVM Fritz!Box Fon WLAN 7050
Page 2
AVM will not be liable for damages arising directly or indirectly from the use of the manual or the soft- ware, nor for incidental or consequential damages, except in case of intent or gross negligence. AVM ex-...
Information to be typed a:\setup in using the keyboard ...for more infor- Gray italics Tips, instructions and warnings mation, see... The Telephone Keypad Numeric keys Asterisk key Hold or Flash key Pound sign key FRITZ!Box Fon WLAN 7050 – Symbols and Highlighting...
The functions and features can be used for analog and ISDN fixed-line connections. The functions and features can be used only for ISDN fixed-line connections. The functions and features can be used only for analog fixed-line connections. FRITZ!Box Fon WLAN 7050 – Symbols and Highlighting...
Disposal Instructions After use, please subject this product to orderly disposal as electronic scrap in accordance with the current EU disposal regulations. FRITZ!Box Fon WLAN 7050 – Safety Instructions...
Possibilities for connecting FRITZ!Box Fon WLAN PBX for Internet and Fixed-Line Telephony FRITZ!Box Fon WLAN 7050 is a PBX for the connection of ana- log and ISDN terminal devices. You can connect three analog telephones to FRITZ!Box Fon WLAN 7050. Up to eight ISDN te- lephony devices can be connected to the integrated ISDN S port.
Page 9
DSL modem. Protection by the Integrated Firewall When FRITZ!Box Fon WLAN 7050 is operated as a DSL router, the integrated firewall protects your network from attacks from the Internet. FRITZ!Box Fon WLAN 7050 – 1 This Is FRITZ!Box Fon WLAN 7050...
WLAN to a computer with a USB interface one network cable (red) for connecting FRITZ!Box Fon WLAN to a computer or network hub one RJ45-RJ11 adapter (gray) for the DSL line (required in some countries) FRITZ!Box Fon WLAN 7050 – 1 This Is FRITZ!Box Fon WLAN 7050...
WLAN adapter (in accordance with IEEE 802.11b/g), for in- stance, a FRITZ!WLAN USB Stick. If you want to connect FRITZ!Box Fon WLAN over the computer’s USB port, a computer with the following specifications is required: FRITZ!Box Fon WLAN 7050 – 1 This Is FRITZ!Box Fon WLAN 7050...
Page 12
– 300 MHz Pentium II processor with Windows XP, Me, 2000 or 98 and CD drive – 32 MB main memory – 20 MB free memory on the hard drive – Internet connection protocol PPPoE FRITZ!Box Fon WLAN 7050 – 1 This Is FRITZ!Box Fon WLAN 7050...
Installation Help to connect FRITZ!Box Fon WLAN to your computer. If you would like to connect and install FRITZ!Box Fon WLAN without this Installation Help, see the instructions in the fol- lowing sections. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Connect the mains adapter to the socket labeled “Power”, located at the far right of the back panel of FRITZ!Box Fon WLAN. Plug the other end into an AC power outlet. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
DSL splitter labeled “DSL”. If the DSL line cable does not fit in the splitter, insert the cable into the gray RJ45-RJ11 adapter enclosed in the package and then plug the adapter into the splitter socket. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Connecting FRITZ!Box Fon WLAN 7050 to ISDN or the Analog Telephone Line Connecting FRITZ!Box Fon WLAN to the DSL splitter The green “Power” LED stops flashing after a short time and remains lit to signalize that FRITZ!Box Fon WLAN is ready for Internet connections over DSL.
Page 17
Connecting FRITZ!Box Fon WLAN 7050 to ISDN or the Analog Telephone Line Connecting FRITZ!Box Fon WLAN 7050 to the ISDN NT If you have an analog telephone line, connect the other end of the cable to the black RJ45-RJ11 adapter included in the package.
To connect the terminal devices by means of the cable clips, please note the following: The wire diameter must be 0.5 - 1 mm. Strip the insulation from the wire to expose a length of 10 mm. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Connect one end of the ISDN cable with the ISDN tele- phone. Connect the other end of the ISDN cable with the “FON S ” port of FRITZ!Box Fon WLAN. Connecting an ISDN telephone to FRITZ!Box Fon WLAN FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Connecting an ISDN PBX to FRITZ!Box Fon WLAN If only one or two analog devices are connected to the PBX, you can connect them directly to FRITZ!Box Fon WLAN and do without the PBX. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
– Connecting a Network via a FRITZ!Box Fon WLAN LAN port and simultaneously connecting several com- puters wirelessly via WLAN. In this manner two dif- ferent networks can be connected to FRITZ!Box Fon WLAN. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 22
FRITZ!Box Fon WLAN to the USB port of an Apple Macintosh computer. If your Apple Macin- tosh computer works with an older version, connect FRITZ!Box Fon WLAN via the LAN port of your computer! FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Connecting FRITZ!Box Fon WLAN to the computer’s network adapter Once the FRITZ!Box Fon WLAN has been connected to the power mains and DSL as described on Page 14, switch on your computer. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 24
Connect the other end of the network cable to the sock- et on FRITZ!Box Fon WLAN labeled “LAN A” or “LAN B”. Connecting FRITZ!Box Fon WLAN to a network hub FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
The key is printed on the stickers on the base of the device and on the cover of the FRITZ!Box Fon WLAN CD. Type of Authentication/Regis- Open key tration Network mode Infrastructure Channel FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 26
FRITZ!Box Fon WLAN, you must used the changed values to set up the WLAN connection or reset the system to its factory settings via a LAN or USB con- nection. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 27
On the “Wireless Networks” settings page, enable the setting “Use Windows to configure my wireless network settings” and then click the “View Wireless Networks” button in the “Available networks” area. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 28
Connecting FRITZ!Box Fon WLAN with the WLAN Adapter of a Computer Wireless network connection properties The “Wireless Network Connection” window opens. All wireless networks found at the location are displayed in a list. Available wireless networks FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 29
Enter the value printed on your sticker as the WLAN key. WLAN Sticker with sample values Repeat your entry in the “Confirm network key” field and then click the “Connect” button. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 30
FRITZ!Box Fon WLAN CD. The key is printed in both formats. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
DSL as described on Page 14, switch on your computer. If Windows Me or Windows 98 are installed on the com- puter, insert the FRITZ!Box Fon WLAN CD. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 32
In some Windows operating systems the display of menus and folders can be changed. The following instructions are based on the standard installation of each operating system. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 33
The drivers for FRITZ!Box Fon WLAN are installed. Conclude the installation by clicking “Finish”. Please see the instructions in the section “Opening the User Interface” on page 37. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 34
(Recommended).” Insert the FRITZ!Box Fon WLAN CD in your CD-ROM drive. When the program asks where the driver is located, ac- tivate only the option “CD-ROM drive”. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 35
The drivers for FRITZ!Box Fon WLAN are installed. Conclude the installation by selecting “Finish” and re- start the computer. Please see the instructions in the section “Opening the User Interface” on page 37. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 36
In the next dialog, “Network address setup”, select the “Automatic address setup (via DHCP)” option. Click “Next”. Changes to the configuration take effect when the “Finish” button is clicked. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Start Center. For more information about FRITZ!DSL, see the chapter “FRITZ!DSL: The Software Suite” from page 53. with a web browser Open your Internet browser on the computer and enter “fritz.box”. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
Page 38
“Errors Opening the User Interface” from page 69. See the section “Configuring FRITZ!Box Fon WLAN for Internet Connections” from page 42 for instructions on configuring Internet connections for FRITZ!Box Fon WLAN. FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation...
The Internet access software is also required to estab- lish Internet connections. If your Internet Service Provider supplies its own access software, you can use this software for your computers. FRITZ!Box Fon WLAN 7050 – 3 Configuring FRITZ!Box Fon WLAN 7050 for Internet Connections...
Have the Internet access information you received from your Internet Service Provider handy. Open the FRITZ!Box Fon WLAN user interface and select the “Configuration Wizard” menu. Follow the instructions of the “Configuration Wizard”. FRITZ!Box Fon WLAN 7050 – 3 Configuring FRITZ!Box Fon WLAN 7050 for Internet Con-...
Use the Internet access software to establish a connection to your Internet Service Provider. As soon as the connection is established, you can start an Internet browser on your com- puter and surf the Internet. FRITZ!Box Fon WLAN 7050 – 3 Configuring FRITZ!Box Fon WLAN 7050 for Internet Connections...
Proceed as follows to set up an additional Internet number: Start a web browser. Enter “fritz.box” in the Address field. Click the “Internet Telephony” command in the “Tele- phony” menu. FRITZ!Box Fon WLAN 7050 – 4 Making Calls with FRITZ!Box Fon WLAN 7050...
ISDN line or an analog line. Enter the ISDN numbers (MSNs) or analog numbers in the corresponding fields. Click the “Apply” button. FRITZ!Box Fon WLAN 7050 – 4 Making Calls with FRITZ!Box Fon WLAN 7050...
If you would like to assign additional numbers to the ex- tension, select from the “Additional numbers” drop- down menus any other numbers the terminal device at the “FON 1” line should react to for incoming calls. FRITZ!Box Fon WLAN 7050 – 4 Making Calls with FRITZ!Box Fon WLAN 7050...
If you specify an Internet number as the outgoing MSN in the ISDN telephone, outgoing calls will be conducted over the Internet. Internet numbers can be set up in the ISDN phone just like MSNs. FRITZ!Box Fon WLAN 7050 – 4 Making Calls with FRITZ!Box Fon WLAN 7050...
ISDN PBX. The Internet num- bers are then assigned to the extensions of the PBX as outgoing numbers. See the documentation for your ISDN PBX for instructions on setting up MSNs. FRITZ!Box Fon WLAN 7050 – 4 Making Calls with FRITZ!Box Fon WLAN 7050...
Click the “New Dialing Rule” button to define as many dialing rules as desired. Click the “Apply” button. FRITZ!Box Fon WLAN 7050 – 4 Making Calls with FRITZ!Box Fon WLAN 7050...
Under unfavorable conditions this can lead to speech quality in Internet tele- phony that is inferior to that in fixed-line telephony. FRITZ!Box Fon WLAN 7050 – 4 Making Calls with FRITZ!Box Fon WLAN 7050...
Page 49
However, this is also true for Internet telephony: once the conversation capacity has been reached, the remote site will receive a busy signal. FRITZ!Box Fon WLAN 7050 – 4 Making Calls with FRITZ!Box Fon WLAN 7050...
Click the “FRITZ!Box” button to open the user interface of FRITZ!Box Fon WLAN in your web browser. Click the “Update” button to check whether a firmware up- date for your FRITZ!Box Fon WLAN is available on the AVM web site. The “Diagnosis” button starts the FRITZ!DSL Diagnosis. It...
For instructions on how to configure FRITZ!DSL Inter- net and use it to connect to the Internet, see the Online Help on FRITZ!DSL Internet. FRITZ!Box Fon WLAN 7050 – 5 FRITZ!DSL: The Software Suite...
Page 52
The FRITZ!DSL Protect program can also be implemented to pro- vide added protection against unauthorized connections to the Internet. FRITZ!Box Fon WLAN 7050 – 5 FRITZ!DSL: The Software Suite...
Internet. Once a URL is entered, WebWatch sends a signal to the desti- nation address. The response times are measured and eval- uated and then displayed in a diagram. FRITZ!Box Fon WLAN 7050 – 5 FRITZ!DSL: The Software Suite...
5.7 Update New firmware updates for FRITZ!Box Fon WLAN are provided by AVM at regular intervals, free of charge. The updates can add new functions to your FRITZ!Box Fon WLAN. Click the “Update” button to check whether there is a new update available for the FRITZ!Box Fon WLAN firmware.
Encryption Standard) procedure. CCM (Counter with CBC- MAC) defines how the AES procedure is applied to WLAN packets. FRITZ!Box Fon WLAN supports the IEEE 802.11i WLAN stan- dard and thus the WPA2 mechanism as well. FRITZ!Box Fon WLAN 7050 – 6 WLAN: Wireless Local Area Networks...
Page 56
TKIP using the WPA mechanism, or AES using the WPA2 mechanism. The user data are encrypted using an automatically gen- erated key. This key is regenerated at regular intervals. FRITZ!Box Fon WLAN 7050 – 6 WLAN: Wireless Local Area Networks...
Page 57
We strongly recommend the use of a WLAN adapter that sup- ports WPA or WPA2 (for instance, the FRITZ!WLAN USB Stick). WEP is out of date and data encrypted with WEP can be deciphered within a few hours. FRITZ!Box Fon WLAN 7050 – 6 WLAN: Wireless Local Area Networks...
Page 58
1 is selected for one WLAN, the channels 7 through 13 can be selected for a second WLAN. This main- tains the minimum distance between channels. FRITZ!Box Fon WLAN 7050 – 6 WLAN: Wireless Local Area Networks...
Page 59
Frequency Range WLAN channels in the 2.4 GHz range: Channel Frequency (MHz) 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 FRITZ!Box Fon WLAN 7050 – 6 WLAN: Wireless Local Area Networks...
IP network” are enabled by default. Every time a computer connected with FRITZ!Box Fon WLAN is restarted, it is assigned an IP address by the DHCP server. FRITZ!Box Fon WLAN 7050 – 7 Guidebook...
Page 61
“IP address” field is the IP ad- dress of FRITZ!Box Fon WLAN. FRITZ!Box Fon WLAN can be reached at this address in the IP network. The IP ad- dress preset upon delivery is 192.168.178.1. FRITZ!Box Fon WLAN 7050 – 7 Guidebook...
Page 62
It is always advisable to use 1 in the fourth block of the IP address. The address may not be from the following address range: 192.168.180.1 - 254 This address range is reserved in FRITZ!Box Fon WLAN for internal purposes. FRITZ!Box Fon WLAN 7050 – 7 Guidebook...
Page 63
“Obtain an IP address automatically” in this com- puter’s IP settings and enter the fixed IP address manually. The IP addresses you assign to the computers may not be from the IP address range of the DHCP server. FRITZ!Box Fon WLAN 7050 – 7 Guidebook...
Page 64
The DHCP Server of FRITZ!Box Fon WLAN 7050 Is Disabled The DHCP Server of FRITZ!Box Fon WLAN 7050 Is Disabled When the DHCP server of FRITZ!Box Fon WLAN is disabled, every computer connected to FRITZ!Box Fon WLAN must be assigned a fixed IP address. Otherwise FRITZ!Box Fon WLAN cannot be reached.
Page 65
The DHCP Server of FRITZ!Box Fon WLAN 7050 Is Disabled The Option “All computers are located in the same IP network” Is Not Enabled In this case the computers connected with FRITZ!Box Fon WLAN over the same interface are located in the same IP net-...
WLAN, but cannot open the user interface by entering “fritz.box” or “192.168.178.1”. Check IP Settings A prerequisite for this check is that the IP settings in FRITZ!Box Fon WLAN are the same as the factory settings ac- tive upon delivery. FRITZ!Box Fon WLAN 7050 – 8 Troubleshooting...
Page 67
“Association” settings page in the “Wireless Network Properties” window. If this procedure is not successful, change the settings in FRITZ!Box Fon WLAN as described in the section “Changing Settings in FRITZ!Box Fon WLAN” from page 69. FRITZ!Box Fon WLAN 7050 – 8 Troubleshooting...
Page 68
How FRITZ!Box Fon WLAN 7050 Can Be Reached at All Times via a LAN Connection How FRITZ!Box Fon WLAN 7050 Can Be Reached at All Times via a LAN Connection FRITZ!Box Fon WLAN has a fixed IP address, which cannot be changed and which can be used to access FRITZ!Box Fon WLAN at any time.
The Radio Network Is Not Displayed 8.2 The Radio Network Is Not Displayed When the WLAN adapter is configured, the radio network “FRITZ!Box Fon WLAN 7050” is not displayed. Checking the WLAN Adapter Settings Make sure that the network mode “Infrastructure” is set rath- er than “Ad-hoc”...
The key is printed on the stickers on the base of the device and on the cover of the FRITZ!Box Fon WLAN CD. Type of Authentication/Reg- Open key istration Network mode Infrastructure Channel FRITZ!Box Fon WLAN 7050 – 8 Troubleshooting...
Page 71
“Wire- less Networks” settings page. In the “Preferred networks” area, select from the list the entry “FRITZ!Box Fon WLAN 7050” and click the “Proper- ties” button. The “FRITZ!Box Fon WLAN 7050 proper- ties” window opens.
DHCP server may be activated in this network. If you need to operate a DHCP server, please disable the DHCP feature in the “Advanced System Settings”. Linux For comprehensive information and tips on the topic of net- work configuration in Linux, see: http://www.linux.org/docs/ldp/howto/NET3-4-HOWTO-5.html FRITZ!Box Fon WLAN 7050 – 8 Troubleshooting...
Page 73
Enable the options “Obtain an IP address automatical- ly” and “Obtain DNS server address automatically”. Properties of the Internet protocol (TCP/IP) Confirm your selection by clicking “OK”. The computer now receives an IP address from FRITZ!Box Fon WLAN. FRITZ!Box Fon WLAN 7050 – 8 Troubleshooting...
Page 74
FRITZ!Box Fon WLAN 7050>”. TCP/IP binding to a network adapter Enable the option “Obtain an IP address automatically”. The “Obtain an IP address automatically” option On the “DNS Configuration” settings page, activate the “Disable DNS” option. FRITZ!Box Fon WLAN 7050 – 8 Troubleshooting...
Page 75
Double-click to select “Internet Protocol (TCP/IP)” in the list of network components. Properties of the LAN connection of a network adapter Enable the options “Obtain an IP address automatical- ly” and “Obtain DNS server address automatically”. FRITZ!Box Fon WLAN 7050 – 8 Troubleshooting...
Page 76
In the “Network” window, select the “Built-in Ethernet” entry from the “Show:” drop-down menu. Switch to the “TCP/IP” settings page and select the “Us- ing DHCP:” option from the “Configure” drop-down menu. Click “Apply Now”. FRITZ!Box Fon WLAN 7050 – 8 Troubleshooting...
FRITZ!Box Fon WLAN. Click “Continue” in the Welcome window and then se- lect “Removal” from the following window. FRITZ!Box Fon WLAN will be removed. FRITZ!Box Fon WLAN 7050 – 9 Removing the FRITZ!Box Fon WLAN 7050...
An overview of all of the icons used in this manual is pre- sented in the section “Symbols and Highlighting” from page 5 of this manual. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Up to ten different numbers can be assigned to each FRITZ!Box Fon WLAN extension. The numbers assigned also determine what kind of connection will be established for outgoing calls. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 80
<number> s12r dials up this connection using the Internet (Inter- <number> net number for access 1) FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 81
Your call is connected with whichever extension answers first. Pick up the handset. Instead of an extension number, dial “9”. All ex- tensions that are not busy ring. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 82
In this case the phone rings as soon as you hang up. Pick up the handset again to return to the Call last call that was on hold. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 83
Dial the sequence shown at left. Enter the num- ber of the extension for “Ext.”. The call is now connected to your extension, and you can talk to the caller. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
To dial a second call, simply dial either the de- sired extension number or the outside line access “0” followed by the desired external number. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 85
In this case, your phone rings as soon as you hang up. Pick up the handset to return to Call 1 again. Hang up the handset to end the connection. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Pick up the handset. Ext. Dial the sequence shown at left. r91ss Save your settings if desired by dial- ing the sequence shown at left. Hang up the handset. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 87
Pick up the handset. Ext. Dial the sequence shown at left. r91ss Save your settings if desired by dial- ing the sequence shown at left. Hang up the handset. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 88
Lay the handset next to the phone or activate the speaker phone. The volume level of the phone can be set to any of eight levels. It is preferable to use the speaker phone function. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 89
Dial the number of the extension to listen in at an extension with room monitoring activated. After initiating a baby monitoring phone call, the PBX cannot generate a new call until at least one minute has lapsed. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
FRITZ!Box Fon WLAN. You can select one of six different options. Different settings may be saved for each extension. Note that only numerical Internet numbers can be entered for diversion to an Internet number. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 91
Pick up the handset. Ext. XNo./Ext. Dial the sequence shown at left. r91ss Save your settings if desired by dial- ing the sequence shown at left. Hang up the handset. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 92
“0” followed by the desired external number. You can now talk to the second subscriber while your first call is on hold. Dial the sequence shown at left to begin a three- party conference call. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 93
ISDN line. Then this feature can be used to forward calls to an external line. Call forwarding is subject to charges by the network provider and cannot be used for forwarding calls to an Internet number. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 94
Call Forwarding Immediately for Your Extension’s Outgoing Caller ID Pick up the handset. s21s XNo. Dial the sequence shown at left. Wait for the acknowledgement tone. Hang up the handset. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 95
Hang up the handset. Disable Call Forwarding Immediately for Any MSN Pick up the handset. s21ss Dial the sequence shown at left. Wait for the acknowledgement tone. Hang up the handset. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 96
Hang up the handset. Call Forwarding When Busy for Any MSN Pick up the handset. s67s XNo. Dial the sequence shown at left. Wait for the acknowledgement tone. Hang up the handset. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 97
Hang up the handset. Disable Call Forwarding When Busy for All MSNs Pick up the handset. s67ssr Dial the sequence shown at left. Wait for the acknowledgement tone. Hang up the handset. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 98
Hang up the handset. Call Forwarding Delayed for All MSNs Pick up the handset. s61s XNo. Dial the sequence shown at left. Wait for the acknowledgement tone. Hang up the handset. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 99
Hang up the handset. Disable Call Forwarding Delayed for All MSNs Pick up the handset. s61ssr Dial the sequence shown at left. Wait for the acknowledgement tone. Hang up the handset. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 100
Type in the number of the extension in the “Ext.” field. r91ss Save your settings if desired by dial- ing the sequence shown at left. Hang up the handset. 100 FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 101
Type in the number of the extension in the “Ext.” field. r91ss Save your settings if desired by dial- ing the sequence shown at left. Hang up the handset. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone 101...
Page 102
Type in the number of the extension in the “Ext.” field. r91ss Save your settings if desired by dial- ing the sequence shown at left. Hang up the handset. 102 FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
In this case the phone rings as soon as you have hung up. Pick up the handset again to accept the wait- ing call. To reject a waiting call, dial the sequence shown at left. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone 103...
Page 104
Dial the sequence shown at left. The connection on hold and the active connection are connected with each other. The external parties continue the call while you clear the connection. Hang up the handset. 104 FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 105
Dial the sequence shown at left. The connection on hold and the active connection are connected with each other. The external parties continue the call while you clear the connection. Hang up the handset. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone 105...
Page 106
PBX. This means that both B channels on your ISDN line remain busy with this connection as long as the parties are connected to each other. 106 FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 107
When you pick up your handset, the number of the desired party is automatically dialed again. This feature is supported for both external and internal con- nections. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone 107...
Page 108
ISDN terminal de- vice (such as an ISDN telephone) that is connected to your BRI line along with FRITZ!Box Fon WLAN. 108 FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
Page 109
During a call or after the caller hangs up, dial the following sequence: Rs39r Dial the sequence shown at left. For more information about this feature, contact your ISDN provider. FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone 109...
Page 110
Entering Keypad Messages on an Extension without Automatic Outside Dialing Pick up the handset. Dial the sequence shown at left. “Seq” stands for the keypad sequence you received from your ISDN provider. 110 FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone...
AVM provides comprehensive information on the AVM home page. Enter the following address: www.avm.de/en Click “Products” for the latest information about all AVM products as well as announcements of new prod- ucts and product versions. FRITZ!Box Fon WLAN 7050 – 11 Information, Updates and Support 111...
AVM Support request form at: www.avm.de/en/service/support Select the product for which you require technical support. Fill out the form and send it to AVM support by clicking the “Send” button. 112 FRITZ!Box Fon WLAN 7050 – 11 Information, Updates and Support...
Page 113
“DSL Info” page of the FRITZ!Box Fon WLAN user interface. Once you have gathered this information, please fax it to AVM Support. The Support team will assist you in resolving your problem. FRITZ!Box Fon WLAN 7050 – 11 Information, Updates and Support 113...
Product Details 12 Product Details This chapter provides you with product details on FRITZ!Box Fon WLAN. You receive detailed technical data and informa- tion on the LEDs. 12.1 FRITZ!Box Fon WLAN LEDs The LEDs on your FRITZ!Box Fon WLAN indicate the following conditions: Event Type Power...
WLAN Ports and Interfaces DSL line Standard ITU G.992.1 Annex A or Annex B (depending on the FRITZ!Box Fon WLAN 7050 model) One USB port (USB version 1.1) Two LAN ports via RJ45 sockets (standard Ethernet, 10/100 base-T) Two extensions over RJ11 sockets...
Page 116
Technical Specifications of FRITZ!Box Fon WLAN User Interface and Display Configuration and status messages via an Internet browser of a connected computer Five LEDs indicate the condition of the device Physical Specifications Dimensions (WxDxH): approx. 185 x 140 x 35 mm Supply voltage: 230 V / 50 Hz Maximum power consumption: 12 W Average power consumption: 9 W...
Internal dial tone External dial tone Positive confirmation Neg. acknowledgment Call waiting Calls External call Internal call Call back Internet telephony Registration error Fixed-line substitute Handset and ring patterns on FRITZ!Box Fon WLAN 7050 FRITZ!Box Fon WLAN – 12 Product Details...
Start Center CLIR, see suppressing caller ID update COLP, see restriction and presentation of update firmware number dialed (COLR/COLP) Webtest COLR, see restriction and presentation of WebWatch number dialed (COLR/COLP) connecting to WLAN consultation 118 FRITZ!Box Fon WLAN 7050 – Index...
Page 119
111 112 LAN port 11 21 suppressing caller ID suspend/resume LEDs 114 116 switch 11 21 Mac OS X technical specifications MCID, see call tracing telephony scenarios traffic shaping transferring calls FRITZ!Box Fon WLAN 7050 – Index...
Page 120
USB cable USB connector USB port user interface WLAN encryption frequency range presettings security 120 FRITZ!Box Fon WLAN 7050 – Index...
Peter Faxel, Technical Director Indication of Countries This device is designed for use in all countries of the European Union and in Switzerland, Norway and Iceland. In France only indoor operation is permitted. FRITZ!Box Fon WLAN 7050 – Declaration of CE Conformity...